用 smartmontools工具檢查 DELL 伺服器的磁碟狀態

依照不同 RAID Controller 分別以不同參數檢查其掛載硬碟的個別狀態：

範例：

# smartctl -a /dev/sda -d sat+megaraid,00
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-358.6.2.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
# smartctl -a /dev/sda -d sat+megaraid,00
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-358.6.2.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST91000640NS
Serial Number:    ........
LU WWN Device Id: . ...... .........
Firmware Version: AA08
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P     showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Jul 10 11:21:52 2014 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
...
...
#

This is on Scientific Linux 6 (another RHEL6 based OS) with smartmontools-5.43-1.el6.x86_64.

本文部分內容出自serverfalut。